Yamaha MG10CA 10 Input Mixer


Yamaha MG10CA  10 Input Mixer Yamaha MG10CA  10 Input Mixer Yamaha MG10CA  10 Input Mixer

The MG10 from Yamaha is a compact ten-input mixer for performances, lectures, recordings and similar applications. The mixer features four mic/line combo inputs with D-PRE mic preamps as well as six 1/4" line inputs with stereo level controls.

Each of the four mic/line inputs is equipped with a 3-band EQ, pan control and a high pass filter. The four D-PRE mic preamps feature an inverted Darlington circuit and switchable 48V phantom power for use with dynamic and condenser microphones. They also each feature 26dB attenuation switches for recording loud sound sources such as guitar amplifiers.

The MG10 mixer has stereo XLR and TRS outs for connecting to your PA system or monitor speakers. It also has a 1/4" headphone output with level control for personal monitoring, as well as additional TRS 1/4" stereo monitor outs for sending to powered speakers, amplifiers or devices such as digital recorders.

  • Three stereo channels made up of six 1/4" line inputs (two stereo channels also have RCA inputs)
  • 3-band EQ on channels 1-4 and 2-band EQ on channels 5-10
  • Pan control on each channel
  • Aux level on each channel feed to TRS aux send for routing to devices such as reverb units
  • One knob compressor on channels 1 & 2 to smooth out the dynamics of vocals and instruments to help them sit better in your mix
  • Optional BMS10A microphone stand adapter (sold separately) allows mounting

Click Here To View Product Manual
Click Here To View Product Brochure

  • Phantom Power +48 V switchable, channels 1 - 4
  • Input Channels 4x mono [mic/line] 
  • 3x stereo [line]
  • Output Channels 2x stereo out 
  • 1x monitor out 
  • 1x headphone out
  • 1x aux out
  • Bus Stereo: 1
  • AUX[FX]: 1
  • Pad 26 dB (mono channels)
  • HPF 80 Hz, 12 dB/oct (mono channels)
  • Compressor Threshold: +22 dBu to -8 dBu 
  • Ratio: 1:1 to 4:1 
  • Output level: 0 dB to 7 dB 
  • Attack time: approx. 25 msec 
  • Release time: approx. 300 msec
  • Equalizer EQ high gain: +15 dB/-15 dB, Frequency: 10 kHz shelving 
  • EQ mid gain: +15 dB/-15 dB, Frequency: 2.5 kHz peaking 
  • EQ low gain: +15 dB/-15 dB, Frequency: 100 Hz shelving
  • LED Peak LED turns on when post EQ signal reaches 3 dB below clipping
  • Level Metering 2 x 7-segment LED meter [PEAK, +10, +6, 0, -6, -10, -20 dB]
  • Total Harmonic Distortion 0.02% @ +14 dBu (20 Hz to 20 kHz), GAIN knob: Min, 0.003% @ +24 dBu (1 kHz), GAIN knob: min
  • Frequency Response +0.5 dB/-1.0 dB (20 Hz to 48 kHz) , refer to the nominal output level @ 1 kHz, GAIN knob: min
  • Equivalent Input Noise -128 dBu (mono input channel, Rs: 150 Ω, GAIN knob: max)
  • Residual Output Noise -102 dBu (STEREO OUT, STEREO LEVEL knob: min)
  • Crosstalk -83 dB
  • Power Requirement PA-10 (AC 38 VCT, 0.62A, Cable length = 3.6 m) or equivalent recommended by Yamaha
  • Power Consumption 22.9 W
  • Dimensions 9.6 x 2.8 x 11.6" (244 x 71 x 294 mm)
  • Net Weight 4.19 lb (1.9 kg)

Other Details:

  • Manufacturer: Yamaha Commercial
  • Model: MG10-CA
  • SKU: MG10-CA
  • Shipping Weight: 5lbs

  • AC Adaptor
  • Limited 1-Year Warranty

- Other Items of Interest -

Poll Sound BBB Business Review Poll Sound is a proud member of the Audio Engineering Society Poll Sound is an infocomm international member info comm Poll Sound is a member of the National Systems Contractors Association
Poll Sound Audio Perfection Logo

© 2017 Poll Sound · Terms · · · 1-800-898-2508